Pliers Suppliers will share this article with you.

Link to X-Spark

No matter what it is you&#;re doing, safety always needs to come first. From working in the kitchen to enjoying your hobby to doing home maintenance, you should always consider your safety and that of others whenever you use any kind of tool. This includes pliers. It might not seem that pliers would be particularly hazardous, especially if you compare them with other tools like drills, saws, and power tools, but don&#;t be deceived:  if you don&#;t pay attention and take care, pliers can certainly cause harm to you, another person, or the materials you are working with.

The following are the safety measures you should take when using pliers:

&#;Check the wire cutting ability of the pliers and all other functions before taking a given application. When choosing the perfect pliers for your application, you must understand all types of pliers.

&#;Use pliers to cut the wires at right angles.

&#;Some people often use a hammer on pliers to cut thicker wires. This activity may damage your hands and pliers. Therefore, never use the hammer on the pliers, and do not use the pliers as a hammer.

&#;In addition, never put the pliers in a place where the temperature is high. If the pliers are kept in an area where the temperature is too high, the performance of the tool will change. In this way, the pliers cannot be used for cutting wires or other applications.

&#;If you want to extend the life of the pliers, take good care of them. You must clean it regularly, and you should also oil it regularly.

You cannot use pliers to tighten the nut.

Important uses of pliers:

When we need to cut wires, most of us think of pliers. However, in the electrical industry and other workshops, pliers are the basic requirements of operators.

&#;Pliers are used to pulling wires and objects.

&#;They are also used for splicing, bending, and tuning.

&#;Most of the time, people mainly use pliers to remove insulation from wires.

&#;Depending on the type of pliers, each plier has its own application.

Basic guidelines to use pliers

&#;Always protect your eyes! When you are cutting wire, or removing a stripped screw, or doing any other work with pliers, debris can fly into the air and into your face. &#;&#;&#;Wear protective goggles or glasses each and every time.

&#;Only use pliers for their intended job. Never use pliers in place of a hammer, shears, or any other tool &#; they have their own purpose. Using them incorrectly and for the wrong application can damage the pliers and also cause accidents.

&#;Use the correct pliers for the job at hand. This means using only designated wire cutting pliers for cutting wire; needle-nose or long-nose pliers for tight spaces; and screw extraction pliers for removing damaged or stripped screws.

&#;Never force pliers. Pliers come in varying levels of capability, and this is why you should have a set of pliers rather than a single pair that you use for every job. Some pliers are specifically intended for light tasks only, while others suit heavy duty use. 

&#;Forcing pliers beyond their capability may result in them breaking or springing.

&#;Don&#;t expose your pliers to excessive heat. Even the sturdiest pliers are sensitive to very high levels of heat, and they will become damaged, possibly beyond repair, if they are exposed to an open or direct flame or otherwise very high temperatures.

&#;Only cut with designated cutting pliers and only at right angles to the wire. Don&#;t rock the pliers from side to side to affect a cut! This may nick the cutting edge of the pliers and will eventually make them blunt.

&#;Never ever use pliers &#; even electrician&#;s lineman pliers &#; on live wires. This is not safe under any circumstance. Only a professional and qualified electrician should ever work with live electricals.

&#;To keep your pliers in prime condition, add a drop of oil at the joint of the pliers periodically. It will keep them opening and closing smoothly and help prevent rust and corrosion.

What are the safety precautions for using

pliers

?

&#;Wear safety glasses or goggles, or wear safety glasses or goggles when there is a possibility of being harmed by flying particles, wire fragments, etc.

&#;Cut at right angles. Do not shake the tool from side to side or bend the wire back and forth on the cutting edge.

&#;Using adjustable pliers allows you to firmly grasp the workpiece while maintaining a comfortable grip (ie, the grip is not too wide).

&#;Use them only if the tools are intact.

&#;The cut edges must be sharp. Blunt and worn cutting edges require more cutting force.

&#;Make sure the toothed jaw is clean and sharp. Greasy or frayed jaws will lead to reduced safety. Such tools also require increased strength to hold the workpiece, which in turn increases the risk of muscle fatigue and repetitive strain.

&#;Use oil tongs and wire cutters regularly. A drop of oil on the hinge will make these tools easier to use.

For more information, please visit Use Pliers As A Hammer On The Handle.

&#;Pull up the pliers; do not push yourself away while applying pressure. If the tool accidentally slips and falls, you may lose your balance or touch the equipment or other hard objects with your hands, which may result in injury.

What should I avoid?

&#;Do not cut hardened wires unless the pliers are specially made for this purpose.

&#;Do not expose the pliers to excessive heat.

&#;Do not use light pliers to bend hard wires. When using the tip of the needle-nose pliers to bend large wires, the needle-nose pliers may be damaged. Use stronger tools.

&#;Do not use pliers as a hammer.

&#;It is forbidden to knock wires and bolts with pliers.

&#;Do not extend the length of the handle for greater leverage. Clamp with larger pliers.

&#;Do not use pliers to clamp nuts and bolts; use a wrench.

We are a supplier of pliers. If you are interested in our products, please contact us now!

Pliers are an important part of every toolbox, and they have multiple uses in industry and at home. As a multi-purpose hand tool, pliers are used primarily for gripping, bending and cutting. Choosing the right pliers for the right job will improve efficiency and safety.

Common Uses of Pliers: What Are They For?

Pliers are an important part of every toolbox, and they have multiple uses in industry and at home. As a multi-purpose hand tool, pliers are used primarily for gripping, bending and cutting. Two crossed metal limbs provide tough leverage that multiplies the strength of the user's hand.

While you can usually use a one-size-fits-all model, there are different classifications of pliers available for specific tasks. Choosing the right pliers for the right job will improve efficiency and safety. Today, let's start with understanding the uses of pliers.

Common Uses of Pliers

1. Gripping

The primary use of pliers is for gripping. You can use them to loosen or tighten bolts, grip objects for stability, or pull out pins, nails, or other fasteners.

For example, slip joint pliers are a utility pliers designed for gripping and transmitting torque. They have relatively flat jaws with teeth for gripping small objects and a rounded, toothed opening for gripping larger objects, such as bolt heads and nuts.

Many pliers also have a small scissor-like section for cutting wire. Tenon pliers work similarly to multi-purpose pliers, but have long handles and offset or angled jaws for improved leverage. The jaws are height adjustable and can open wide to grip pipes and large nuts.

2. Bending/Straightening

The pliers can also be used for bending or straightening. The cross brace of pliers gives them superb torque power to bend and twist objects such as sheet metal, nails and wires.

All pliers can help bend things, so the kind you choose depends largely on the specific object you need to bend. Long-nose pliers or needle-nose pliers help you grip small objects that may be difficult to reach. Electricians usually use lineman's pliers to bend wires and cables.

3. Cutting

Some pliers can also cut wires and nails. Diagonal cutting pliers and side-cutting pliers, often called wire cutters, are primarily used to cut and sever wires. In most cases, their jaw construction makes wire cutters less suitable for gripping large objects, such as bolts. However, they are still considered pliers because of their ability to effectively grip and remove nails.

4. Splicing Wires/Stripping Insulation

Electricians use a variety of special pliers to splice wires and strip insulation. For this task, lineman's pliers are a popular choice. Using the wire cutter feature, you can cut through the insulation of one wire and strip off a small section to reveal the bare wire inside. If you do the same thing to another wire, you can use the pliers to help join or splice the two wires together.

Safety Tips for Using Pliers

Following are the safety measures that you should take while using pliers:

-Check the wire cutting capability of the pliers as well as all other features before using them for a specific application. When choosing the perfect pliers for your application, it is best that you have the necessary knowledge of all types of pliers.

-Always use pliers to cut wires at right angles.

-Some people often use a hammer to strike the pliers to cut thicker wires. This activity may damage your hands and the pliers. Therefore, never use a hammer on pliers or use pliers as a hammer.

-Do not put the pliers in a place where the temperature is very high. If the pliers are left in a place where the temperature is too high, the characteristics of the tool may change and no longer do the job perfectly. The plastic handles of some pliers may also be damaged by excessive temperatures.

-If you want to increase the life of your pliers, then you have to maintain it properly. Clean it regularly and you can oil the pliers every once in a while.

-Do not use the pliers to tighten the nuts.

In this way, we have introduced the main uses of pliers, their types and some safety precautions. We hope this article has been helpful to you. If you have any questions, feel free to leave us a message.

If you are looking for more details, kindly visit Single Ratchet Wrench Manufacturer.