SAE Hydraulic Hose &#; Completed Structures for All Your Working Environments
Want more information on china sae100r9? Feel free to contact us.
As we all know, the SAE standard is an important standard in hydraulic hose design, construction and pressure rating to ensure that hydraulic hoses meet minimum construction requirements. Here are All completed SAE standard hydraulic hoses ranges from R1 to R17. You can refer to them according to the drawings, section structures and specs. Then choose the best one suitable for you.
If you need the EN standard hydraulic hose, click for another page: EN Standard Hydraulic Hose.
Or, you can refer to our catalogs, for all schedules of hydraulic hose.
SAE 100R1 Steel Wire Reinforced Hydraulic Rubber Hose
Introduction
SAE 100R1 single steel wire braided hose is a typical high pressure hydraulic hose and it is suitable for hydraulic lines or general industrial system. High tensile strength steel wire reinforcement makes SAE 100R1 hose support higher pressure than common steel wire.
SAE 100R1 rubber hose should be used with petroleum- and water-based hydraulic fluids within a temperature ranging from -40 °C to +100 °C.
SAEH-01: SAE 100R1 hydraulic hose drawing.
SAEH-02: SAE 100R1-AT hydraulic hose.
Construction
- Tube: black, oil resistant synthetic rubber.
- Reinforcement: one-braid high tensile steel wire.
- Cover: black, oil and abrasion resistant synthetic rubber.
- Temperature: -40 °C to +100 °C (-40 °F to +212 °F).
Specification
Table 1: SAE 100R1 Steel Wire Reinforced Hydraulic Rubber Hose Technical Specification
Item
Size
SAE Size
I.D.
Reinforcement W.D.
O.D.
Max. W.P.
Proof Pressure P.P.
Min. B.P.
Min. B.R.
Weight
A
AT
mm
inch
dash
min.
max.
min.
max.
min.
max.
max.
MPa
psi
MPa
psi
MPa
psi
mm
kg/m
SAER1-01
5
3/16
-3
4.6
5.4
8.9
10.1
11.9
13.5
12.5
21
42
84
90
0.20
SAER1-02
6.3
1/4
-4
6.2
7.0
10.6
11.7
15.1
16.7
14.1
19.2
38.5
77
100
0.25
SAER1-03
8
5/16
-5
7.7
8.5
12.1
13.3
16.7
18.3
15.7
17.5
35
70
115
0.31
SAER1-04
10
3/8
-6
9.3
10.1
14.5
15.7
19.0
20.6
18.1
15.7
31.5
63
125
0.36
SAER1-05
12.5
1/2
-8
12.3
13.5
17.5
19.0
22.2
23.8
21.5
14
28
56
180
0.45
SAER1-06
16
5/8
-10
15.5
16.7
20.6
22.2
25.4
27.0
24.7
10.5
21
42
205
0.52
SAER1-07
19
3/4
-12
18.6
19.8
24.6
26.2
29.4
31.0
28.6
8.7
17.5
35
240
0.65
SAER1-08
25
1
-16
25.0
26.4
32.5
34.1
36.9
39.3
36.6
7
14
28
300
0.91
SAER1-09
31.5
1-1/4
-20
31.4
33.0
39.3
41.7
44.4
47.6
44.8
4.3
620
8.7
17.5
420
1.30
SAER1-10
38
1-1/2
-24
37.7
39.3
45.6
48.0
50.8
54.0
52.0
3.5
510
7
14
500
1.70
SAER1-11
51
2
-32
50.4
52.0
58.7
61.9
65.1
68.3
65.9
2.6
380
5.2
750
10.5
630
2.00
SAE 100R2 High Pressure Steel Wire Reinforced Hydraulic Rubber Hose
Introduction
SAE 100R2 high pressure steel wire reinforced hydraulic hose should be used with petroleum- and water-based hydraulic fluids within a temperature ranging from -40 °C to 100 °C. It consists of an inner tube of oil-resistant synthetic rubber, steel-wire reinforcement according to hose type, as detailed below, and an oil and weather resistant synthetic rubber cover. A ply, or braid, of suitable material may be used over the inner tube and/or over the wire reinforcement to fasten the synthetic rubber to the wire.
SAEH-03: SAE 100R2 hydraulic hose drawing.
SAEH-04: SAE 100R2 hydraulic hose.
Application
- It is ideal for outside working environments including offshore, forestry, construction and mining where high abrasion resistance is required.
- Petroleum- and water based hydraulic fluids with high pressure can pass through the inner tube smoothly and freely without producing excessive heat and leak.
- It is also found in mobile equipment including farm tractor, dump truck and in-plant hydraulic equipment.
Construction
- Tube: black, oil resistant, Nitrile (NBR).
- Reinforcement: two-braid high tensile steel wire.
- Cover: Abrasion and weather resistant synthetic rubber.
- Temperature: -40 °C to +100 °C (-40 °F to +212 °F).
Table 2: SAE 100R2 Steel Wire Reinforced Hydraulic Rubber Hose Technical Specification
Item
Size
SAE Size
I.D.
Reinforcement W.D.
O.D.
Max. W.P.
Proof Pressure P.P.
Min. B.P.
Min. B.R.
Weight
A
AT
mm
inch
dash
min.
max.
min.
max.
min.
max.
max.
MPa
psi
MPa
psi
MPa
psi
mm
kg/m
SAER2-01
5
3/16
-3
4.6
5.4
10.6
11.7
15.1
16.7
14.1
35
70
140
90
0.32
SAER2-02
6.3
1/4
-4
6.2
7
12.1
13.3
16.7
18.3
15.7
35
70
140
100
0.36
SAER2-03
8
5/16
-5
7.7
8.5
13.7
14.9
18.3
19.8
17.3
29.7
59.5
119
115
0.45
SAER2-04
10
3/8
-6
9.3
10.1
16.1
17.3
20.6
22.2
19.7
28
56
112
125
0.54
SAER2-05
12.5
1/2
-8
12.3
13.5
19
20.6
23.8
25.4
23.1
24.5
49
98
180
0.68
SAER2-06
16
5/8
-10
15.5
16.7
22.2
23.8
27
28.6
26.3
19.2
38.5
77
205
0.8
SAER2-07
19
3/4
-12
18.6
19.8
26.2
27.8
31
32.5
30.2
15.7
31.5
63
240
0.94
SAER2-08
25
1
-16
25
26.4
34.1
35.7
38.5
40.9
38.9
14
28
56
300
1.35
SAER2-09
31.5
1-1/4
-20
31.4
33
43.2
45.6
49.2
52.4
49.6
11.3
22.7
45.5
420
2.15
SAER2-10
38
1-1/2
-24
37.7
39.3
49.6
52
55.6
58.7
56
8.7
17.5
35
500
2.65
SAER2-11
51
2
-32
50.4
52
62.3
64.7
68.3
71.4
68.6
7.8
15.7
31.5
630
3.42
SAE 100R3 Double Fiber Braid (Nonmetallic) Hydraulic Rubber Hose
Introduction
SAE 100R3 double fiber braid hydraulic rubber hose is ideal for medium pressure fuel and oil lines as well as return and suction hoses of hydraulic systems. It is constructed with an inner tube of oil-resistant synthetic rubber, a reinforcement consisting of a ply, or plies, of woven or braided textile fibers with a suitable spiral of body wire, and an oil and weather resistant synthetic rubber cover.
SAEH-05: SAE 100R3 hydraulic hose drawing.
SAEH-06: SAE 100R3 hydraulic hose.
Construction
- Tube: black, oil resistant, Nitrile (NBR).
- Reinforcement: two-barid textile, which is pre-treated for tube and cover adhesion.
- Cover: An oil and weather resistant synthetic rubber.
- Temperature: -40 °C to +100 °C (-40 °F to +212 °F).
Table 3: SAE 100R3 Double Fiber Braid (Nonmetallic) Hydraulic Rubber Hose Technical Specification
Item
Size
SAE Size
I.D.
O.D.
Max. W.P.
Proof Pressure P.P.
Min. B.P.
Min. B.R.
Weight
mm
inch
dash
min.
max.
min.
max.
MPa
psi
MPa
psi
MPa
psi
mm
kg/m
SAER3-01
5
3/16
-3
4.5
5.4
11.9
13.5
10.5
21
42
75
0.16
SAER3-02
6.3
1/4
-4
6.1
7.0
13.5
15.1
8.7
17.5
35
75
0.18
SAER3-03
8
5/16
-5
7.6
8.5
16.7
18.3
8.4
16.8
33.5
100
0.27
SAER3-04
10
3/8
-6
9.2
10.1
18.3
19.8
7.8
15.7
31.5
100
0.31
SAER3-05
12.5
1/2
-8
12.4
13.5
23.0
24.6
7
14
28
125
0.45
SAER3-06
16
5/8
-10
15.6
16.7
26.2
27.8
6.1
885
12.2
24.5
140
0.53
SAER3-07
19
3/4
-12
18.7
19.8
31.0
32.5
5.2
750
10.5
21
150
0.72
SAER3-08
25
1
-16
25.1
26.2
36.9
39.3
3.9
570
7.8
15.7
205
0.90
SAER3-09
31.5
1-1/4
-20
31.4
32.9
42.9
46.0
2.6
380
5.2
750
10.5
250
1.07
SAE 100R4 Wire Inserted Hydraulic Suction Hose
Introduction
SAE 100R4 wire inserted low pressure hydraulic hose is frequently applied to suction & return line, anti-static delivery line, and vacuum applications for petroleum-based and water-based hydraulic fluids. It is constructed with an inner tube of oil-resistant synthetic rubber, a reinforcement consisting of a ply, or plies, of woven or braided textile fibers with a suitable spiral of body wire, and an oil and weather resistant synthetic rubber cover.
SAEH-07: SAE 100R4 hydraulic hose drawing.
SAEH-08: SAE 100R4 hydraulic hose.
Construction
- Tube: black, oil resistant, Nitrile (NBR).
- Reinforcement: a ply or piles of woven or braided textile fibers with a suitable spiral of body steel wire.
- Cover: an oil and weather resistant synthetic rubber.
- Temperature: -40 °C to +100 °C (-40 °F to +212 °F).
Table 4: SAE 100R4 Wire Inserted Hydraulic Suction Hose Technical Specification
Item
Size
SAE Size
I.D.
O.D.
Max. W.P.
Proof Pressure P.P.
Min. B.P.
Min. B.R.
Weight
mm
inch
dash
min.
max.
max.
MPa
psi
MPa
psi
MPa
psi
mm
kg/m
SAER4-01
19
3/4
-12
18.2
19.8
34.9
2.1
305
4.2
610
8.4
125
0.92
SAER4-02
25
1
-16
24.6
26.2
41.3
1.7
250
3.5
510
7
150
1.10
SAER4-03
31.5
1-1/4
-20
30.6
33
50.8
1.4
200
2.8
410
5.6
810
200
1.30
SAER4-04
38
1-1/2
-24
36.9
39.3
57.2
1.05
150
2.1
305
4.2
610
255
1.80
SAER4-05
51
2
-32
49.2
52.4
69.9
0.7
100
1.4
200
2.8
410
300
2.23
SAER4-06
63
2-1/2
-40
61.9
65.1
82.6
0.4
60
0.85
120
1.7
250
355
3.23
SAER4-07
76
3
-48
74.6
77.8
95.3
0.4
60
0.8
120
1.6
230
460
4.25
SAER4-08
89
3-1/2
-56
87.3
90.5
107.9
0.3
40
0.6
90
1.25
180
530
5.05
SAER4-09
102
4
-64
100
103.2
120.7
0.25
40
0.5
70
1
145
610
5.60
SAE 100R5 Single Wire Braided Textile Covered Hydraulic Rubber Hose
Introduction
SAE 100R5 single wire braid and textile covered hydraulic rubber hoses are widely used in medium pressure applications. They are suitable for conveying petroleum-based hydraulic oil, air and water with specified pressure to air brakes, power steering, turbo oil lines and tilt cab cylinders. Oil resistant tube, single wire braid reinforcement and fiber braided cover contributes high performance. Fabric braids should be resistant to oils and mildew.
SAEH-09: SAE 100R5 hydraulic hose drawing.
SAEH-10: SAE 100R5 hydraulic hose.
Construction
- Tube: oil resistant synthetic rubber.
- Reinforcement: A single high tensile steel wire braid.
- Cover: A fiber braided cover.
- Temperature: -40 °C to +100 °C (-40 °F to +212 °F).
Table 5: SAE 100R5 Steel Wire Reinforced Hydraulic Rubber Hose Technical Specification
Item
Size
SAE Size
I.D.
O.D.
Max. W.P.
Proof Pressure P.P.
Min. B.P
Min. B.R.
Weight
mm
inch
dash
min.
max.
min.
max.
MPa
psi
MPa
psi
MPa
psi
mm
kg/m
SAER5-01
5
3/16
-3
4.8
5.5
12.7
13.7
21.0
42
84
75
0.24
SAER5-02
6.3
1/4
-4
6.4
7.2
14.3
15.3
21.0
42
84
85
0.28
SAER5-03
8
5/16
-5
7.9
8.7
16.7
17.6
15.7
31.5
63
100
0.35
SAER5-04
11
1-3/32
-6
10.3
11.1
18.9
20
14.0
28
56
115
0.38
SAER5-05
12.5
1/2
-8
12.7
13.7
22.8
24
12.2
24.5
49
140
0.51
SAER5-06
16
5/8
-10
15.9
17
26.8
28
10.5
21
42
165
0.68
SAER5-07
22
7/8
-14
22.2
23.3
30.6
32.2
5.6
810
11.2
22.4
185
0.70
SAER5-08
29
1-1/8
-22
28.6
29.8
37.3
38.9
4.3
620
8.7
17.5
230
0.80
SAER5-09
35
1-3/8
-26
34.9
36.1
43.7
45.2
3.5
510
7
14
265
0.93
SAER5-10
46
1-13/16
-30
46.0
47.2
55.2
57.6
2.4
350
4.9
700
9.8
335
1.32
SAER5-11
60
2-3/8
-38
60.3
61.9
71.8
74.2
2.4
350
4.9
700
9.8
610
2.96
SAER5-12
76
3
-48
76.2
77.8
89.3
91.7
1.4
200
2.8
410
5.6
810
840
4.10
SAE 100R6 Fiber Reinforced (Nonmetallic) Hydraulic Rubber Hose
Introduction
SAE 100R6 textile braided hydraulic hose is applied to the low pressure conditions, especially where tight routing is urgently required. It is also including return & suction lines, power steering return hoses, lube lines and air lines without brake applications.
It consists of an inner tube of oil-resistant synthetic rubber, one-braid suitable textile yarn and an oil and weather resistant synthetic rubber cover.
SAEH-11: SAE 100R6 hydraulic hose drawing.
SAEH-12: SAE 100R6 hydraulic hose with fittings.
Construction
- Tube: oil resistant synthetic rubber.
- Reinforcement: one-braid suitable fiber.
- Cover: oil and weather resistant synthetic rubber.
- Temperature: -40 °C to +100 °C (-40 °F to +212 °F)
Table 6: SAE 100R6 Fiber Reinforced (Nonmetallic) Hydraulic Rubber Hose Technical Specification
Item
Size
SAE Size
I.D.
O.D.
Max. W.P.
Proof Pressure P.P.
Min. B.P.
Min. B.R.
Weight
mm
inch
dash
min.
max.
max.
MPa
psi
MPa
psi
MPa
psi
mm
kg/m
SAER6-01
5
3/16
-3
4.2
5.4
10.3
3.5
510
7
14
50
0.10
SAER6-02
6.3
1/4
-4
5.6
7.2
11.9
2.8
410
5.6
810
11.2
65
0.13
SAER6-03
8
5/16
-5
7.2
8.8
13.5
2.8
410
5.6
810
11.2
75
0.15
SAER6-04
10
3/8
-6
8.7
10.3
15.1
2.8
410
5.6
810
11.2
75
0.18
SAER6-05
12.5
1/2
-8
11.9
13.5
19.0
2.8
410
5.6
810
11.2
100
0.26
SAER6-06
16
5/8
-10
15.1
16.7
22.2
2.4
350
4.8
710
9.8
125
0.34
SAER6-07
19
3/4
-12
18.3
19.9
25.4
2.1
310
4.2
610
8.4
150
0.40
SAE 100R7 Thermoplastic Hydraulic Hose
Introduction
SAE 100R7 non-conductive thermoplastic hydraulic hose is available for applications where there are potential to contact with high voltage sources. Nylon tube is compatible with petroleum, water and synthetic based hydraulic fluids for mobile equipment, lube lines, blowout preventers and hydraulic lifts where nonconductive character is necessary. It consists of a thermoplastic inner tube resistant to hydraulic fluids with suitable synthetic-fiber reinforcement and a hydraulic fluid and weather resistant thermoplastic cover.
SAEH-13: SAE 100R7 hydraulic hose drawing.
SAEH-14: SAE 100R7 hydraulic hose.
Construction
- Tube: A thermoplastic inner tube of resistant to hydraulic fluids.
- Reinforcement: Reinforced with suitable synthetic fiber.
- Cover: A hydraulic fluid and weather resistant thermoplastic.
- Temperature: -40 °C to +93 °C (-40 °F to +199.4 °F).
Table 7: SAE 100R7 Thermoplastic Hydraulic Hose Technical Specification
Item
Size
SAE Size
I.D.
O.D.
Max. W.P.
Proof Pressure P.P.
Min. B.P.
Min. B.R.
Weight
mm
inch
dash
min.
max.
max.
MPa
psi
MPa
psi
MPa
psi
mm
kg/m
SAER7-01
5
3/16
-3
4.6
5.4
11.4
21
42
84
90
0.073
SAER7-02
6.3
1/4
-4
6.2
7.0
13.7
19.2
38.5
77
100
0.090
SAER7-03
8
5/16
-5
7.7
8.5
15.6
17.5
35
77
115
0.128
SAER7-04
10
3/8
-6
9.3
10.3
18.4
15.7
31.5
63
125
0.155
SAER7-05
12.5
1/2
-8
12.3
13.5
22.5
14
28
56
180
0.224
SAER7-06
16
5/8
-10
15.5
16.7
25.8
10.5
21
42
205
0.277
SAER7-07
19
3/4
-12
18.6
19.8
28.6
8.7
17.5
35
240
0.330
SAER7-08
25
1
-16
25.0
26.4
36.7
7
14
28
300
0.403
SAE 100R8 High Pressure Thermoplastic Hydraulic Hose
Introduction
SAE 100R8 high pressure thermoplastic hydraulic hose is used in non-conductive applications where there are potential of contact with high voltage sources, such as blowout preventers, lube lines and construction machinery. It consists of a thermoplastic inner tube resistant to hydraulic fluids with suitable synthetic-fiber reinforcement and a hydraulic fluid and weather resistant thermoplastic cover.
SAEH-15: SAE 100R8 hydraulic hose drawing.
Related links:Custom production of Polyester fabrics for conveyor belts
Are you interested in learning more about steel spiral wire hydraulic hose in china? Contact us today to secure an expert consultation!
SAEH-16: SAE 100R8 hydraulic hose.
Construction
- Tube: A thermoplastic inner tube of resistant to hydraulic fluids.
- Reinforcement: Reinforced with suitable synthetic fiber.
- Cover: A hydraulic fluid and weather resistant thermoplastic.
- Temperature: -40 °C to +93 °C (-40 °F to +199.4 °F)
Table 8: SAE 100R8 High Pressure Thermoplastic Hydraulic Hose Technical Specification
Item
Size
SAE Size
I.D.
O.D.
Max. W.P.
Proof Pressure P.P.
Min. B.P.
Min. B.R.
Weight
mm
inch
dash
min.
max.
max.
MPa
psi
MPa
psi
MPa
psi
mm
kg/m
SAER8-01
5
3/16
-3
4.6
5.4
14.6
35
70
140
90
0.086
SAER8-02
6.3
1/4
-4
6.2
7.0
16.8
35
70
140
100
0.097
SAER8-03
10
3/8
-6
9.3
10.3
20.3
28
56
112
125
0.178
SAER8-04
12.8
1/2
-8
12.3
13.5
24.6
24.5
49
98
180
0.215
SAER8-05
16
5/8
-10
15.5
16.7
29.8
19.2
38.5
77
205
0.312
SAER8-06
19
3/4
-12
18.6
19.8
33
15.7
31.5
63
240
0.360
SAER8-07
25
1
-16
25.0
26.4
38.6
14
28
56
300
0.505
SAE 100R9 High Pressure Four Spiral Steel Wire Hydraulic Rubber Hose
Introduction
SAE 100R9 high pressure four spiral steel wire hydraulic rubber hose consist of an inner tube of oil resistant synthetic rubber, four-spiral steel wire reinforcement and oil and weather resistant synthetic rubber cover. Spiral hydraulic hose shares outstanding kick resistance, impulse resistance and can support surge pressure.
SAE 100R9 high pressure four spiral steel wire hydraulic rubber hose is widely used in applications where high pressure, high abrasion and kick resistance are urgently required, petroleum base hydraulic fluids within a temperature ranging from -40 °C to +100 °C.
SAEH-17: SAE 100R9 hydraulic hose drawing.
SAEH-18: SAE 100R9 hydraulic hose.
Construction
- Tube: High quality synthetic rubber compounds.
- Reinforcement: Four-spiral high tensile steel wire.
- Cover: Abrasion and weather resistant synthetic rubber.
- Temperature: -40 °C to +100 °C(-40 °F to +212 °F).
Table 9: SAE 100R9 High Pressure Four Spiral Steel Wire Hydraulic Rubber Hose Technical Specification
Item
Size
SAE Size
I.D.
Reinforcement W.D.
O.D.
Max. W.P.
Proof Pressure P.P.
Min. B.P.
Min. B.R.
Weight
A
AT
mm
inch
dash
min.
max.
min.
max.
min.
max.
max.
MPa
psi
MPa
psi
MPa
psi
mm
kg/m
SAER9-01
10
3/8
-6
9.3
10.1
16.9
18.0
20.6
22.2
21.1
31.5
63
126
125
0.70
SAER9-02
12.5
1/2
-8
12.3
13.5
19.4
21.0
23.8
25.4
24.3
28
56
112
180
0.83
SAER9-03
19
3/4
-12
18.6
19.8
26.6
28.2
30.6
32.2
31.9
21
42
84
240
1.30
SAER9-04
25
1
-16
25.0
26.4
34.5
36.1
38.5
40.9
40.5
21
42
84
300
1.70
SAER9-05
31.5
1-1/4
-20
31.4
33.0
43.3
45.6
49.2
52.4
50.7
17.5
35
70
420
3.08
SAER9-06
38
1-1/2
-24
37.7
37.7
49.6
52.0
55.6
58.7
&#;
14
28
56
500
4.30
SAER9-07
51
2
-32
50.4
50.4
63.9
66.2
69.9
73.0
&#;
14
28
56
660
5.63
SAE 100R12 Heavy Duty High Four Spiral Steel Wire Hydraulic Rubber Hose
Introduction
SAE 100R12 heavy duty hydraulic hose is reinforced by four layers of spiral steel wire in alternating directions which can balance pressure and containment forces. Spiral wire reinforcement is ideal for high-impulse and high abrasion resistance applications. This section covers hose for using with petroleum based hydraulic fluids within a temperature ranging from -40 °C to +121 °C.
It consists of an inner tube of oil-resistant synthetic rubber, four spiral plies of heavy wire wrapped in alternating directions, and an oil and weather resistant synthetic rubber cover. A ply, or braid, of suitable material may be used over the inner tube and/or over the wire reinforcement to fasten the synthetic rubber to the wire.
SAEH-19: SAE 100R12 hydraulic hose.
SAEH-20: SAE 100R12 hydraulic hose.
Construction
- Tube: oil resistant synthetic rubber compounds.
- Reinforcement: four spiral piles of steel wire wrapped in alternating directions.
- Cover: oil and weather resistant synthetic rubber.
- Temperature: -40 °C to +120 °C (-40 °F to +250 °F).
Table 10: SAE 100R12 Heavy Duty High Four Spiral Steel Wire Hydraulic Rubber Hose Technical Specification
Item
Size
SAE Size
I.D.
Reinforcement W.D.
O.D.
Max. W.P.
Proof Pressure P.P.
Min. B.P.
Min. B.R.
Weight
mm
inch
dash
min.
max.
min.
max.
min.
max.
MPa
psi
MPa
psi
MPa
psi
mm
kg/m
SAER12-01
10
3/8
-6
9.3
10.1
16.6
17.8
19.5
21.0
28
56
112
125
0.70
SAER12-02
12.5
1/2
-8
12.3
13.5
19.9
21.5
23.0
24.6
28
56
112
180
0.83
SAER12-03
16
5/8
-10
15.5
16.7
23.8
25.4
26.6
28.2
28
56
112
200
1.12
SAER12-04
19
3/4
-12
18.6
19.8
26.9
28.4
29.9
31.5
28
56
112
240
1.43
SAER12-05
25
1
-16
25.0
26.4
34.1
35.7
36.8
39.2
28
56
112
300
2.00
SAER12-06
31.5
1-1/4
-20
31.4
33.0
42.7
45.1
45.4
48.6
21
42
84
420
2.80
SAER12-07
38
1-1/2
-24
37.7
39.3
49.2
51.6
51.9
55.0
17.5
35
70
500
3.40
SAER12-08
51
2
-32
50.8
52.0
62.5
64.8
65.1
68.3
17.5
35
70
640
4.25
SAE 100R13 Heavy Duty High Multiple Spiral Steel Wire Hydraulic Rubber Hose
Introduction
SAE 100R13 heavy duty high multiple spiral steel wire hydraulic hoses are reinforced with four layers of spiral wires in alternation directions to provide extremely high working pressure. It is constructed with an inner tube of oil resistant synthetic rubber, followed by multiple spiral plies of heavy wire wrapped in alternating directions, and concluding with an oil and weather resistant synthetic rubber cover. A ply, or braid, of suitable material may be used over the inner tube and/or over the wire reinforcement to fasten the synthetic rubber to the wire.
SAEH-21: SAE 100R13 hydraulic hose drawing.
SAEH-22: SAE 100R13 hydraulic hose.
Construction
- Tube: black, oil resistant, Neoprene (CR).
- Reinforcement: multiple spiral piles of steel wires wrapped in alternating directions.
- Cover: oil and weather resistant synthetic rubber.
- Temperature: -40 °C to +120 °C (-40 °F to +250 °F).
Table 11: SAE 100R13 Heavy Duty High Multiple Spiral Steel Wire Hydraulic Rubber Hose Technical Specification
Item
Size
SAE Size
I.D.
Reinforcement W.D.
O.D.
Max. W.P.
Proof Pressure P.P.
Min. B.P.
Min. B.R.
Weight
mm
inch
dash
min.
max.
min.
max.
min.
max.
MPa
psi
MPa
psi
MPa
psi
mm
kg/m
SAER13-01
19
3/4
-12
18.6
19.8
28.2
29.8
31.0
33.2
35
70
140
240
2.10
SAER13-02
25
1
-16
25.0
26.4
34.9
36.4
37.6
39.8
35
70
140
300
2.88
SAER13-03
31.5
1-1/4
-20
31.4
33.0
45.6
48.0
48.3
51.3
35
70
140
420
4.20
SAER13-04
38
1-1/2
-24
37.7
39.3
53.1
55.5
55.8
58.8
35
70
140
500
5.00
SAER13-05
51
2
-32
50.4
52.0
66.9
69.3
69.5
72.7
35
70
140
640
7.00
Introduction
SAE 100R14 PTFE hydraulic hose for use with petroleum based and synthetic based hydraulic fluids within a temperature ranging from -54 °C to +204 °C. It can also be used with water based hydraulic fluids within the environments, where the temperature should be agreed upon by the manufactures of both the hose and the fluid. It has two types for different application. Type A consists of an inner tube of Polytetrafluoroethylene (PTFE) reinforced with a single braid of type 303XX stainless steel.
Type B has the same construction as Type A, but type B has the additional feature of an electrically-conductive inner surface to prevent buildup of an electrostatic charge.
SAEH-23: SAE 100R14 hydraulic hose drawing.
SAEH-24: Two inner tube types of SAE 100R14 hydraulic hoses.
Construction
- Tube: polytetrafluoroethylene (PTFE).
- Reinforcement: a single braid of 303XX series stainless steel wire.
- Cover: one stainless steel wire braid.
- Temperature: -54 °C to +204 °C (-65 °F to +400 °F)
Table 12: SAE 100R14 PTFE Lined Hydraulic Hose Technical Specification
Item
Size
SAE Size
I.D.
O.D.
Max. W.P
Proof Pressure P.P.
Min. B.P.
Min. B.R.
mm
dash
min.
max.
min.
max.
MPa
psi
MPa
psi
MPa
psi
mm
SAER14-01
3.2
-3
2.8
3.8
5.3
6.8
10.5
41.4
82.7
40
SAER14-02
5
-4
4.4
5.2
7.1
8.2
10.5
34.5
68.9
50
SAER14-03
6.3
-5
6.0
6.9
8.9
10.1
10.5
31.0
62.0
75
SAER14-04
8
-6
7.5
8.4
10.4
11.6
10.5
27.6
55.2
100
SAER14-05
10
-7
9.1
10.0
12.2
13.4
10.5
24.1
48.3
125
SAER14-06
11
-8
9.9
10.9
12.9
14.3
7
20.7
41.4
135
SAER14-07
12.5
-10
12.3
13.3
15.3
16.8
5.6
812
20.7
41.4
165
SAER14-08
16
-12
15.3
16.5
18.6
20.1
5.6
812
17.2
34.5
200
SAER14-09
19
-14
18.4
19.6
21.3
23.3
5.6
812
16.8
27.6
230
SAER14-10
22
-16
21.4
23.0
24.6
26.9
5.6
812
12.1
24.1
230
SAER14-11
25
-18
24.6
26.2
27.8
29.8
5.6
812
12.1
24.1
300
SAER14-12
29
-20
27.8
29.4
31.9
31.9
4.2
609
8.6
17.2
410
SAE 100R15 Heavy Duty High Pressure Impulse Spiral Steel Wire Hydraulic Rubber Hose
Introduction
SAE 100R15 high pressure hydraulic hose is reinforced by four or six alternating layers of spiral and high tensile steel wires. It is very popular in logging, construction, mining, agriculture and oil field equipment, because it can work constantly under high pressure.
It consists of an inner tube of oil-resistant synthetic rubber, multiple spiral plies of heavy wire wrapped in alternating directions, and an oil and weather resistant rubber cover. A ply, or braid, of suitable material may be used over or within the inner tube and/or over the wire reinforcement to anchor the synthetic rubber to the wire.
SAEH-25: Two types of SAE 100R15 hydraulic hoses.
SAEH-26: SAE 100R15-6 hydraulic hose.
Construction
- Tube: black, oil resistant, Neoprene (CR).
- Reinforcement: multiple spiral piles of heavy steel wire wrapped in alternating directions.
- Cover: oil and weather resistant synthetic rubber.
- Temperature: -40 °C to +120 °C (-40 °F to +250 °F).
Table 13: SAE 100R15 Heavy Duty High Pressure Impulse Spiral Steel Wire Hydraulic Rubber Hose Technical Specification
Item
Size
SAE Size
I.D.
Reinforcement W.D.
O.D.
Max. W.P.
Proof Pressure P.P.
Min. B.P.
Min. B.R.
Weight
mm
inch
dash
min.
max.
max.
max.
MPa
psi
MPa
psi
MPa
psi
mm
kg/m
SAER15-01
10
3/8
-6
9.3
10.1
20.3
23.3
42
84
168
150
0.80
SAER15-02
12.7
1/2
-8
12.3
13.5
24.0
26.8
42
84
168
200
0.95
SAER15-03
19
3/4
-12
18.6
19.8
32.0
36.1
42
84
168
265
1.85
SAER15-04
25
1
-16
25.0
26.4
38.9
42.9
42
84
168
330
2.90
SAER15-05
31.5
1-1/4
-20
31.4
33.0
48.4
51.5
42
84
168
445
4.20
SAER15-06
38
1-1/2
-24
37.7
39.3
56.3
59.6
42
84
168
530
5.60
SAE 100R16 Compact High Pressure One and Two Steel Wire Hydraulic Rubber Hose
Introduction
SAE 100R16 compact high pressure hydraulic rubber hose consists of an inner tube of oil resistant synthetic rubber, one or two braids of steel wire reinforcement, and an oil and weather resistant synthetic rubber cover. A ply, or braid, of suitable material may be used over the inner tube and/or over the wire reinforcement to anchor the synthetic rubber to the wire.
SAE 100R16 compact high pressure hydraulic rubber hose has priority when you choose hydraulic hoses for narrow routing spacing, it is applied for backhoe, farm tractor, forklift truck, dump truck, mobile equipment. It is also widely used with petroleum base hydraulic fluids within -40 °C to +100 °C.
SAEH-27: SAE 100R16 hydraulic hose drawing.
SAEH-28: SAE 100R16-2 hydraulic hose.
Construction
- Tube: oil resistant synthetic rubber.
- Reinforcement: steel wire reinforcement according to hose design (one or two braids).
- Cover: oil and weather resistant synthetic rubber.
- Temperature: -40 °C to +100 °C(-40 °F to +212 °F).
Table 14: SAE 100R16 Compact High Pressure One and Two Steel Wire Hydraulic Rubber Hose Technical Specification
Item
Size
SAE Size
I.D.
Reinforcement W.D.
O.D.
Max. W.P.
Proof Pressure P.P.
Min. B.P.
Min. B.R.
Weight
mm
inch
dash
min.
max.
max.
max.
MPa
psi
MPa
psi
MPa
psi
mm
kg/m
SAER16-01
6.3
1/4
-4
6.2
7.0
12.3
14.5
35
70
140
50
0.30
SAER16-02
8
5/16
-5
7.7
8.5
13.3
15.7
30
59.5
119
55
0.34
SAER16-03
10
3/8
-6
9.3
10.1
15.9
18.8
33
56
112
65
0.42
SAER16-04
12.5
1/2
-8
12.3
13.5
19.0
22.0
27.5
49
98
90
0.54
SAER16-05
16
5/8
-10
15.5
16.7
22.6
25.4
25
38.5
77
100
0.68
SAER16-06
19
3/4
-12
18.6
19.8
26.3
29.0
21.5
31.5
63
120
0.80
SAER16-07
25
1
-16
25.0
26.4
34.0
36.6
16.5
28
56
150
1.15
SAER16-08
31.5
1-1/4
-20
31.4
33.0
41.9
44.3
12.5
22.7
45.5
210
1.83
SAE 100R17 Compact 21 MPa Maximum Working Pressure Hydraulic Rubber Hose
Introduction
SAE 100R17 Compact hydraulic rubber hose has smaller bend radius and is ideal for tight routing where hose space is limited. It provides continuous working pressure for mining equipment, logging equipment, material handling and farm tractor.
It is consist of an inner tube of oil resistant synthetic rubber, steel wire reinforcement according to hose design (one or two braids), and an oil and weather resistant synthetic rubber cover. A ply or braid of suitable material may be used over the inner tube or over the wire reinforcement to anchor the synthetic rubber to the wire.
SAEH-29: SAE 100R17 hydraulic hose drawings
SAEH-30: SAE 100R17 hydraulic hose.
Construction
- Tube: oil resistant synthetic rubber.
- Reinforcement: steel wire reinforcement according to hose design (one or two braids).
- Cover: oil and weather resistant synthetic rubber.
- Temperature: -40 °C to +100 °C(-40 °F to +212 °F).
Table 15: SAE 100R17 Compact 21 MPa Maximum Working Pressure Hydraulic Rubber Hose Technical Specification
Item
Size
SAE Size
I.D.
Reinforcement W.D.
O.D.
Max. W.P.
Proof Pressure P.P.
Min. B.P.
Min. B.R.
Weight
mm
inch
dash
min.
max.
max.
max.
MPa
psi
MPa
psi
MPa
psi
mm
kg/m
SAER17-01
6.3
1/4
-4
6.2
7.0
11.0
13.2
21
42
84
50
0.169
SAER17-02
8
5/16
-5
7.7
8.5
13.0
15.0
21
42
84
55
0.210
SAER17-03
10
3/8
-6
9.3
10.1
15.0
17.0
21
42
84
65
0.254
SAER17-04
12.5
1/2
-8
12.3
13.5
18.8
21.1
21
42
84
90
0.466
SAER17-05
16
5/8
-10
15.5
16.7
23.6
25.9
21
42
84
100
0.586
SAER17-06
19
3/4
-12
18.6
19.8
27.7
30.3
21
42
84
120
0.749
SAER17-07
25
1
-16
25.0
26.4
35.6
35.6
21
42
84
150
1.457
All Comments ( 0 )