Steam Radiators
Steam heating is one of the oldest heating technologies, and upright metal steam radiators positioned along walls in older homes are common. They can provide consistent, comfortable heat.

gtboiler supply professional and honest service.

Steam radiators need some simple maintenance to work properly and efficiently. In addition, a radiator can warp or create a groove in the floor. If that happens, the radiator may tilt, causing it to make loud banging noises. Plus, steam radiators on exterior walls can radiate some heat to the outdoors, and limit your ability to position furniture around the room.

Hot Water Radiators
More common in newer homes, hot water radiators run along a room&#;s baseboard or stand upright like a steam radiator. Hot water radiators can reduce your home&#;s energy consumption because they allow you to control the temperature of each floor or a large space. A heating professional can install automatic valves on the radiators, and connect them to separate thermostats.

The most common problem with hot water radiators is unwanted air in the system. Plus, like steam models, upright hot water radiators can limit your ability to position furniture.

Hydronic Radiant Floor Heating
Hydronic (water) systems are the most common radiant floor heating systems. A boiler heats water and flows it to tubing under the flooring, which acts as a giant radiator. Hydronic systems can heat a whole house, but they&#;re mainly used to heat a single room or area, and some can be zoned so thermostats regulate each space.

Hydronic radiant heating is more efficient than baseboard heating and usually more efficient than forced-air heating, too. It also doesn&#;t distribute allergens like forced-air systems can, and uses little electricity. However, hydronic systems can be expensive to install and to repair, and may not be as efficient if the floor is covered with thick carpeting.

 CHOOSING A BOILER

Choosing the right Boiler for your Home

Choosing the right boiler depends on your property and individual needs. Some important factors to consider:

• Position &#; wall hung or floor-standing models are available. The boilers distance from an outside wall or the roof will affect the type of flue you have (&#; Open ' or &#; Room-sealed' ).

• Size of household &#; for example, does your boiler need to supply heating and hot water for a number of bathrooms?

 
• Running costs - look for energy rating labels to compare costs.

 
• Maintenance &#; some boilers require stringent servicing than others.

 
• Safety - all boilers require a regular service by a qualified professional. It is a legal requirement for gas boilers to be inspected by a qualified GAS SAFE engineer annually. Boilers or flues must not be altered without seeking expert advice. Check out this gas boiler inspection information.

Pro's and Con's of Boiler Options

Traditional Boiler

A cast iron heat exchanger heats the water, similar to a gas burner under a kettle.

Pros:

• operates quietly and has reliable, easily understood controls

 
• huge range of sizes suit most properties

Cons:

• fuel consumption is relatively high

Combination Boiler

The &#;Combi' will provide both hot water for you central heating and your taps.

Pros:

If you are looking for more details, kindly visit Wall Mounted Condensing Gas Boiler.

• ideal for a flat or small house because the lack of tanks saves space
   
• instant hot water to your taps

Cons:

• the internal workings are complicated and can be expensive to repair, so a maintenance contract or boiler insurance cover is advisable
   
• not highly suitable for a large house where a number of people require hot water at the same time

Condensing Boiler

A modern gas boiler available for fully pumped systems or as a combination boiler.

Pros:

• designed so that water returning from the heating system is used to cool the flue gases - this extracts heat which is normally lost

• works best with radiator temperatures of about 60 ˚C (140˚F), but even at a temperature of up to 80˚C (176˚F) they are significantly more efficient than other boilers

Cons:

• requires a fan assisted flue

Oil-Fired Boiler

Traditional, combination and condensing boilers can be oil-fired. They are generally floor-standing, though some are wall-hung models.

Pros:

• one of the cheapest heating fuels available

Cons:

• servicing costs are generally higher and deliveries must be planned
   

Back-Boiler

This boiler type offers gas, oil or solid fuel consumption.

Pros:

• a &#;cosy' look and feel as it includes a fire facility (solid fuel consumption)

Cons:

• requires a natural-draught open flue
   
• solid fuel back boilers work only when the fire is lit so an electric immersion heater is needed for hot water in summer

Copyright © -
Hints and Things
All Rights Reserved.



No portion of this site may be reproduced or redistributed without prior written permission from Hints and Things. All trademarks & copyrights throughout Hints and Things remain the property of their respective owners.

Hints and Things cannot be held responsible for any information given on this site nor do they necessarily agree with, or endorse, the views given by third parties.

For more information, please visit Hot Oil Boiler.