Safety and Advantages

This graph shows the temperature rates of a selection of materials. The numbers for our grinder are on the left with a conventional grinder used as a comparison.

Link to Sikai

The best reason to have AVL Tool and Die tools is that it gives you a stress-free workday. There are only 2 steps needed to get going.

Step 1: Make the clear decision to grind or cut the needed area and discuss it with the supervisor.

Step 2: Once the go-ahead is given, clear the work area, grab the appropriate AVL Tool and Die tool head, mount the air powered tool, and do the job.

Quickly and easily.

That's it. It may take a couple minutes to sweep or vacuum up the minimal shavings but they should all be concentrated in the immediate area. Then put away the tool and you're done.

Safe and health-friendly workplaces are a necessity in every country. In the United States of America, Occupational Safety and Health Administration (OSHA) directs employers to assure workplaces that are safe to work, and ensures their safety and wellbeing. All industries are regulated by OSHA&#;s directives. The chemical industry is no exception from this. There are specific guidelines regarding the use of non-sparking tools in chemical equipment industries working with acetylene. Are you intrigued to know how these tools help acetylene plant owners to adhere to OSHA guidelines? What are the benefits offered by these tools? Read the post below.

Regulations and Adherence

According to OSHA&#;s Hand and Portable Powered Tools and Equipment Standard [29 Code of Federal Regulations (CFR) .242(a)], the employers are required to provide safe equipment and tools to their employees. It also recommends the employers to maintain non-sparking tools in a safe and usable condition every time. The standard directs employers to avoid using non-sparking hand tools directly with acetylene, especially when moisture is present. As this may lead to the formation of explosive acetylides.

Although non-sparking tools are not recommended for direct use with chemicals like acetylene, still there are beneficial in many ways. Learn how by reading below.

A Brief Introduction to Non-sparking Tools

As the name suggests, these tools provide protection against fire and explosions in those environments, where flammable chemicals, fuels, materials, residues or gasses may be present. Many times, these tools are also referred to as &#;spark-reduced&#;, &#;spark-proof&#;, and &#;spark-resistant&#;.

Are you interested in learning more about Non Sparking Valve Wheel Hook Supplier? Contact us today to secure an expert consultation!

The spark-proof tools are made from various non-ferrous materials such as bronze, brass, Monel metal (copper-nickel alloy), copper-beryllium alloys (beryllium bronze), and copper-aluminum alloys (aluminum bronze). Today, the most used hand tools are created using steel alloys.

3 Reasons to Use Non-sparking Tools in an Acetylene Plant

The following are a few benefits of using spark-free tools in a chemical plant using acetylene equipment or acetylene gas.

1. Corrosion Resistance: Most non-sparking tools made from the fore mentioned metals exhibit strong corrosion resistance due to their material of construction. In addition to acetylene laden environments, these tools are also ideal for applications where they may come in contact with alkali, acids, and various other types of chemicals.

2. Non-magnetic: Magnetism is usually associated with ferrous metals. As seen most non-sparking tools are made from non-magnetic metals. This help reduce the chances of magnetic or electronic disturbances in the plants, where acetylene is used. Also, the non-sparking tools used in acetylene will not affect the settings of the instruments.

3. Durability: As discussed before, today, many non-sparking tools are made from copper alloys. It is often mentioned that low tensile strength steels are used for this construction. However, that doesn&#;t mean these tools are softer. As with any regular tools, most of these non-sparking tools are durable, and strong enough to withstand the regular abuse at chemical plants.

Due to the above-mentioned reasons, non-sparking tools are considered safe for users in volatile environments. Also, it is important to maintain these tools in good working condition. The next section describes some tips to do so.

Maintenance Tips for Non-sparking Tools

The following are easy-to-follow tips for maintaining tools spark-proof:

1. The tools should be cleaned after every use to avoid contaminants from settling on the surface.

2. Use the right sized tool for any task in the acetylene plant. This will help avoid the tool from slipping from hand, and chances of sparking.

3. Never store tools where they could be exposed to moist acetylene.

In addition to using good quality non-sparking tools, it is important to source acetylene plants from a reliable supplier. Rexarc International, Inc., is one of the trusted manufacturers and distributors of acetylene plants in the US.